Knowledge & Resources

Learn how to size a dust collector for negative air and containment. Compare airflow ranges, diesel vs electric options, and mobility needs to match your jobsite, filtration goals, and production demands.

Compare vapor blaster options for reduced-dust surface prep. Learn how pot size, wet/dry vs slurry systems, and equipment footprint affect productivity, refills, and jobsite setup.

Learn how to choose the right industrial vacuum for abrasive recovery, dust cleanup, and shutdown work. Compare standard vs double dump setups, filtration options, and waste handling for efficient jobsite cleanup.

Learn how to choose the right steel grit recycler for high-production blasting. Compare 2-pot, 4-pot, and 6-pot systems by nozzle configuration, recovery capacity, crew size, and jobsite workflow.

Compare single-leg airless pump rentals for industrial coatings. Learn how pump ratio, material viscosity, and production needs affect performance, and choose between the WIWA GX 63:1 and GX 75:1.

Learn how to choose the right plural component sprayer for high-build and protective coatings. Review TDS requirements, production needs, heated hose options, and operator requirements for WIWA DUOMIX and Graco XP70 rentals.

Learn how to plan a mortar pump rental for masonry, restoration, and grouting work. Get setup tips for material consistency, placement distance, workflow, and operator readiness using the SP-11 LMR Stage V.

Compare rental heaters for cold-weather jobsites and containments. Learn how to choose Frost Fighter IDF500 vs Mag Fan D6000 based on BTU needs, heat loss, airflow, and runtime.

Compare Atlas Copco mobile generator rentals to match your jobsite power needs. Learn how to size QAS 25 vs QAS 125 based on total load, startup demand, runtime, and equipment planning.

Fuel cubes help keep diesel-powered jobsites running without constant refueling. Compare 250 and 500 gallon fuel cubes based on runtime needs, fuel consumption, placement logistics, and diesel-only requirements.

Dry ice blasting is ideal when moisture, abrasive media, or disassembly are not practical. This guide explains how to choose the right dry ice blaster setup based on air supply, pellet size, surface sensitivity, and jobsite planning.

Learn how to choose the right decontamination trailer for asbestos, lead, and regulated remediation work. Compare 2-stall, 4-stall, and 6-stall options based on crew size, filtration needs, power requirements, and jobsite access.

Choosing the right rental blast pot is critical to blasting efficiency, abrasive control, and jobsite productivity. This guide explains how to select the correct blast pot based on abrasive capacity, operator count, airflow, and application requirements.

Choosing the right rental air drying system is critical for controlling moisture, protecting equipment, and ensuring consistent performance. This guide explains how to size and select a deliquescent air dryer based on airflow, job conditions, and application needs.