Blast and Recovery Systems: The Solution for Jobs Where Open-Air Blasting Isn’t an Option
Blast and Recovery Systems: The Solution for Jobs Where Open-Air Blasting Isn’t an Option
When open-air abrasive blasting is prohibited, impractical, or too messy, a blast and recovery system (BRS) delivers clean, contained surface prep. Schmidt® BRS units blast and vacuum simultaneously—capturing spent abrasive, contaminants, and dust at the source—to minimize cleanup, reduce risk, and keep sensitive sites operational.
When to Use a Blast and Recovery System
Use a BRS whenever dust, debris, or media carryover can’t be tolerated—or when containment and cleanup would be costly. Typical applications include: indoor blasting, occupied facilities, historic restoration, lead or asbestos abatement, bridge and road maintenance, ship cleaning, and sensitive industrial environments.
Watch: Axxiom Schmidt® MiniBRS™ overview & operation
How Blast & Recovery Systems Deliver Dust-Controlled Blasting
A blast head directs abrasive to the surface while a high-vacuum shroud captures media and debris the moment it’s dislodged. Spent abrasive and contaminants are pulled back through the hose to a separator and dust collector. Operators can also run these systems in blast-only or vacuum-only modes for added flexibility.
MiniBRS™: Compact Power for Tight or Sensitive Spaces
- Blast & recover simultaneously—or run blast or vacuum independently.
- Ergonomic blast/vac head with a trigger-style deadman for one-hand start/stop.
- 40% larger blast pattern vs. prior head; lighter, smaller-diameter hoses sized to the system.
- Hi-temp brush option enables blasting on high-temperature surfaces.
- Reach: Blast and recover up to 200 ft from the unit.
- Air: Operates on a 185 cfm compressor.
Available for sale; custom configurations available.
MiniBRS™ — Learn More
MiniBRS™ Blast Head: Control, Comfort, Productivity
The redesigned head improves grip, control, and maneuverability. A trigger-style deadman lets the operator toggle blast on/off with the same hand, while the other hand stays on the head for precision and safety.
- Brush options: flat, inside corner, outside corner, and high-temp.
- Two-hand control for balance and reduced operator fatigue.
BRS: The Industry Standard for Contained Abrasive Blasting
The Schmidt® BRS maximizes the use of recyclable abrasives to remove coatings and corrosion from steel or concrete. Blast and recover simultaneously or operate separately. Eliminate dust clouds, reduce cleanup, and improve visibility for efficient surface prep and compliance with containment requirements.
BRS — Learn More
BRS II: Higher Capacity for Contractor-Grade Productivity
The BRS2 is a heavy-duty, portable system built for higher output with 13.5 cu. ft., 20.0 cu. ft., or custom-sized pots. It pairs heavy-duty components for blasting, vacuuming, and dust collection—ideal for extended production runs and larger surface areas.
Available for sale; custom-built configurations available to match your workflow.
BRS II — Learn MoreShop Blast & Recovery Systems
Explore the full Schmidt® Blast and Recovery Systems lineup available for sale or custom build.
The Bottom Line
Blast and Recovery Systems make clean, contained blasting possible wherever open-air methods can’t be used. By combining abrasive blasting with on-tool recovery, Schmidt® BRS units help contractors meet safety, environmental, and productivity goals—without compromising performance or surface quality.
Ready to blast cleaner, faster, and safer?
Talk with Sandblast Solutions about Schmidt® Blast and Recovery Systems—available for sale and custom configurations.