Buy Coatings and Chemicals

CIM 1000 is a liquid applied urethane coating that:

• Cures in hours to form a tough elastomeric coating
• Adheres to most substrates
• Forms a chemical and abrasion-resistant barrier for waterproofing, corrosion protection, and containment of water and most aqueous chemicals.

*Kit Includes Premix and Activator*

Features & Benefits: 

CIM 1000 Trowel Grade is a tough liquid applied urethane coating that is:

• Chemically thickened to allow vertical application with minimum sag up to ¼ inch.
• ANSI/NSF 61 certified for potable water contact up to 82ºC.
• Cures in hours to form a tough elastomeric coating.
• Available in 4.5 gallons, 0.8-gallon kits, and cartridges.

*Kit Includes Premix and Activator*

Features & Benefits:

CIM 1061 is a liquid applied urethane coating that:

• ANSI/NSF 61 approved for potable water contact up to 82ºC.
• Excellent wear and abrasion resistance.
• Cures in hours to form a tough elastomeric coating
• Ideal for coating concrete
• Available in 5 gallons and .8 gallon kits.

*Kit Includes Premix and Activator*

Features & Benefits:

CIM 500V is a tough, durable membrane specifically formulated to meet waterproofing demands in a buried and non-UV exposed application. CIM 500 is horizontal grade.

It adheres to most materials to form a permanent, seamless barrier to water.

It is well suited for plaza and podium decks, curbs, and areas containing multiple penetrations or irregular shapes, as well as split-slab applications.

*Kit Includes Premix and Activator*

Advantages & Benefits:

• tough, durable physical properties
• forms strong adhesive bond to concrete, wood, metal, and earth (with scrim fabric)
• applied by spray, brush, roller, or squeegee
• fast cure, high tensile strength, low VOC
• lower water permeability than competitive urethanes
• open to foot traffic within 3 hours
• UV stable for as long as 180 days
• little to no sloping is required
• chemically stable when subjected to constant moisture
• can be applied in low-temperature applications
• simple repair to existing installations

CIM 500V is a tough, durable membrane specifically formulated to meet waterproofing demands in a buried and non-UV exposed application. CIM 500V is vertical grade.

It adheres to most materials to form a permanent, seamless barrier to water.

It is well suited for plaza and podium decks, curbs, and areas containing multiple penetrations or irregular shapes, as well as split-slab applications.

*Kit Includes Premix and Activator*

Advantages & Benefits:

• tough, durable physical properties
• forms strong adhesive bond to concrete, wood, metal, and earth (with scrim fabric)
• applied by spray, brush, roller, or squeegee
• fast cure, high tensile strength, low VOC
• lower water permeability than competitive urethanes
• open to foot traffic within 3 hours
• UV stable for as long as 180 days
• little to no sloping is required
• chemically stable when subjected to constant moisture
• can be applied in low-temperature applications
• simple repair to existing installations

CIM 800 is a tough liquid applied urethane coating that:

• Cures in hours to form a tough elastomeric coating
• Adheres to most substrates
• Specifically formulated to meet the demands of waterproofing applications
• Designed for below-grade or topcoated application

*Kit Includes Premix and Activator*

Features & Benefits:

CIM ECO Epoxy Primer is a two-component solvent free epoxy coating formulated for porous and non-porous surfaces such as concrete, wood, steel, aluminum, and other metals.

*Kit Includes Resin and Hardener*

Advantages:

• Solvent-free formula
• Forms a protective film on porous surfaces to reduce outgassing in waterproof coatings
• Prevents the formation of flash rust on freshly blasted metals
• CIM liquid applied waterproofing membranes can be applied in as few as 4 hours after primer application

CIM EMT primer is a two-component solvent-free epoxy primer designed for green and damp porous surfaces such as concrete.

*Kit Includes Resin and Hardener*

Features & Benefits:

CIM VOC Compliant Bonding Agent is an organo-silane compound dispersed in acetone. It improves the adhesion of CIM high-performance coatings and linings to a variety of non-porous surfaces such as metal, glass, CIM coatings past allowable recoat window

Options: 1 gallon, 5 gallon

Features & Benefits: 

• High Solids/low VOC
• Compliant to toughest VOC regulations
• It improves the adhesion of CIM coatings to non-porous substrates
• Improves metal, glass, plastic, tile, etc.