Buy Blasting Equipment

The operation of the AmphiBlast™ Mini is simple. Set the desired blast pressure using the blast pressure control regulator. Choose to blast dry or wet by pushing or pulling a button on the control panel. During wet abrasive blasting, simply dial the water pressure regulator to the desired flow rate represented by the water over air differential pressure gauge reading.

The AmphiBlast Mini comes in two options, standard with an onboard water tank and without.

The operation of the AmphiBlast™ Lite is simple. Set the desired blast pressure using the blast pressure control regulator. Choose to blast dry or wet by pushing or pulling a button on the control panel. During wet abrasive blasting, simply dial the water pressure regulator to the desired flow rate represented by the water over air differential pressure gauge reading.

The AmphiBlast Lite comes in two options, standard with an onboard water tank and without.

Unlike other blast systems that mix abrasive and water inside the vessel, the AmphiBlast system injects water into the blast stream after the metering valve, using a patent-pending, user-friendly and uniquely precise water injection system. With this system, you can quickly and consistently control every aspect: fine-tune air, abrasive, and water flows to achieve optimal blasting performance, all while maintaining efficient use of abrasive and water. Switch between wet or dry blast, blowoff, and Softwash™ without having to reset your air, abrasive, or water, using a central, easy-to-use gauge console.

Unlike other blast systems that mix abrasive and water inside the vessel, the AmphiBlast system injects water into the blast stream after the metering valve, using a patent-pending, user-friendly and uniquely precise water injection system. With this system, you can quickly and consistently control every aspect: fine-tune air, abrasive, and water flows to achieve optimal blasting performance, all while maintaining efficient use of abrasive and water. Switch between wet or dry blast, blowoff, and Softwash™ without having to reset your air, abrasive, or water, using a central, easy-to-use gauge console.

Unlike other blast systems that mix abrasive and water inside the vessel, the AmphiBlast system injects water into the blast stream after the metering valve, using a patent-pending, user-friendly and uniquely precise water injection system. With this system, you can quickly and consistently control every aspect: fine-tune air, abrasive, and water flows to achieve optimal blasting performance, all while maintaining efficient use of abrasive and water. Switch between wet or dry blast, blowoff, and Softwash™ without having to reset your air, abrasive, or water, using a central, easy-to-use gauge console.

Features & Benefits:

• Operate up to three nozzles/outlets simultaneously
• Independently set each nozzle for wet blast, dry blast, softwash or blowoff
• Greater abrasive capacity for increased productivity
• The HALOK® system mechanically requires the operator to follow proper procedure in order to open the 10" closure
• The CEN™ blowdown system reduces blowdown noise levels to approximately 92 dba (equivalent to traffic noise) and prevents frost buildup, which has been reported to retain dangerous pressure in the vessel
• The Ergo-Ladder is a curved ladder with non-slip rungs, grab handle, and attachment point for fall protection systems. It makes for easier, safer and more comfortable access to the 10" closure
• The Manway Stay Bracket automatically retains the manway cover for easier, error-free installation 

*Optional Trailer Mount Available*