Buy Coatings and Chemicals

4EvaSeal® Multi-Purpose tape can be provided in a variety of colors (white, black, gray, tan) and is used to seal holes and repair single ply membranes such as TPO, PVC, etc. Multi-Purpose tapes are UV resistant and come with a backing that is 23% thicker than the leading competitors.  This additional thickness provides more material to protect your roof from the elements, UV exposure while offering other benefits. This added protection results in longer-term performance than competitive materials. Multi-Purpose tape can also be used on an RV to stop water intrusion.  The most common application is on the roof and slide-outs to seal the perimeters and penetrations.

Thickness: 25 mil, 50 mil 

Roll Options: 2" x 50', 3" x 50', 4" x 50', 6" x 50', 12" x 50'

4EvaSeal Fabric Tape is commonly used in conjunction with roof coatings and waterproofing materials.  This tape combines a conformable fabric backing with an aggressive elastomeric adhesive.

• 4EvaSeal Fabric Tape combines a conformable fabric backing with the same elastomeric polymer adhesive found on all other 4EvaSeal products.
• The tape is commonly used in conjunction with roof coatings and waterproofing materials.
• It is engineered to be used as a detailing material, to reinforce seams or detail transitions.
• Paints and coatings will wet into the fabric allowing them to stick aggressively to the tape

Roll Options: 2" x 50', 4" x 50', 6" x 50', 12" x 50'

4EvaSeal® Double-Sided tape can be used between plies of roofing materials and flashings, skylights, windows, doors, joints cracks and other places (such as an RV) to bond and seal materials. It can also be used between metals to prevent corrosion. The tape can also be rolled up or beaded and used to fill gaps, joints, holes or other areas of the building envelope to provide a watertight seal. Double-Sided tape is not resistant to UV exposure.

Thickness: 30 mil, 60 mil

Roll Options: 1" x 50', 2" x 50', 3" x 50', 4" x 50', 6" x 50'

4EvaSeal ® Aluminum Tape can be used where an aluminum color or maximum UV protection is required. This tape uses a thick aluminum backing with an elastomeric polymer adhesive technology. No competitive aluminum tape combines the same thick backing with an adhesive as aggressive as 4EvaSeal tape.

Roll Options: 2" x 50', 3" x 50', 4" x 50', 6" x 50', 12" x 50'

4EvaSeal ® Butyl Flashing Tape is a 25 mil, UV resistant, cold applied butyl based tape. The tape provides protection against water intrusion on windows and doors. In-service temperature as high as 300°F (149°C). Butyl Flashing Tape does not require the use of a primer in order to apply in most applications. Ideal for windows and doors. 

4EvaSeal® Roofing Underlayment is a 25 mil, UV resistant, cold applied butyl based material. It provides protection against water intrusion on roof surfaces. In-service temperatures up to 300°F (149°C). Does not require the use of a primer prior to application. Ideal for use on most roof types. 

CIM ECO 1000 is a tough, durable elastomeric coating that is formulated to perform in the most demanding environments. This two-component, liquid applied urethane coating bonds strongly to most construction materials to form a permanent, seamless physical barrier to water and chemicals.

Typical applications include:

• Waterproofing
• Corrosion protection
• Containment 

CIM 1061 is a liquid applied urethane coating that:

• ANSI/NSF 61 approved for potable water contact up to 82ºC
• Excellent wear and abrasion resistance
• Cures in hours to form a tough elastomeric coating
• Ideal for coating concrete
• Available in 5 gallons and .8 gallon kits

*Kit Includes Premix and Activator*

Features & Benefits:

CIM 1000 is a liquid applied urethane coating that:

• Cures in hours to form a tough elastomeric coating
• Adheres to most substrates
• Forms a chemical and abrasion-resistant barrier for waterproofing, corrosion protection, and containment of water and most aqueous chemicals

*Kit Includes Premix and Activator*

Features & Benefits: 

CIM 1000 Trowel Grade is a tough liquid applied urethane coating that is:

• Chemically thickened to allow vertical application with minimum sag up to ¼ inch
• ANSI/NSF 61 certified for potable water contact up to 82ºC
• Cures in hours to form a tough elastomeric coating
• Available in 4.5 gallons, 0.8-gallon kits, and cartridges

*Kit Includes Premix and Activator*

Features & Benefits:

Offering the same features & benefits of CIM 1000 Trowel Grade kits. 

Cartridge Advantages:

• East to use
• Reusable
• Ideal for test patches
• Stops roof leaks
• Great for crack repair
• Use to make cant beads
• Use for repairs to existing CIM
• Potable water approved

CIM 800 is a tough liquid applied urethane coating that:

• Cures in hours to form a tough elastomeric coating
• Adheres to most substrates
• Specifically formulated to meet the demands of waterproofing applications
• Designed for below-grade or topcoated application

*Kit Includes Premix and Activator*

Features & Benefits:

CIM 500V is a tough, durable membrane specifically formulated to meet waterproofing demands in a buried and non-UV exposed application. CIM 500 is horizontal grade.

It adheres to most materials to form a permanent, seamless barrier to water.

It is well suited for plaza and podium decks, curbs, and areas containing multiple penetrations or irregular shapes, as well as split-slab applications.

*Kit Includes Premix and Activator*

Advantages & Benefits:

• tough, durable physical properties
• forms strong adhesive bond to concrete, wood, metal, and earth (with scrim fabric)
• applied by spray, brush, roller, or squeegee
• fast cure, high tensile strength, low VOC
• lower water permeability than competitive urethanes
• open to foot traffic within 3 hours
• UV stable for as long as 180 days
• little to no sloping is required
• chemically stable when subjected to constant moisture
• can be applied in low-temperature applications
• simple repair to existing installations

CIM 500V is a tough, durable membrane specifically formulated to meet waterproofing demands in a buried and non-UV exposed application. CIM 500V is vertical grade.

It adheres to most materials to form a permanent, seamless barrier to water.

It is well suited for plaza and podium decks, curbs, and areas containing multiple penetrations or irregular shapes, as well as split-slab applications.

*Kit Includes Premix and Activator*

Advantages & Benefits:

• tough, durable physical properties
• forms strong adhesive bond to concrete, wood, metal, and earth (with scrim fabric)
• applied by spray, brush, roller, or squeegee
• fast cure, high tensile strength, low VOC
• lower water permeability than competitive urethanes
• open to foot traffic within 3 hours
• UV stable for as long as 180 days
• little to no sloping is required
• chemically stable when subjected to constant moisture
• can be applied in low-temperature applications
• simple repair to existing installations

CIM ECO Epoxy Primer is a two-component solvent free epoxy coating formulated for porous and non-porous surfaces such as concrete, wood, steel, aluminum, and other metals.

*Kit Includes Resin and Hardener*

Advantages:

• Solvent-free formula
• Forms a protective film on porous surfaces to reduce outgassing in waterproof coatings
• Prevents the formation of flash rust on freshly blasted metals
• CIM liquid applied waterproofing membranes can be applied in as few as 4 hours after primer application

CIM EMT primer is a two-component solvent-free epoxy primer designed for green and damp porous surfaces such as concrete.

*Kit Includes Resin and Hardener*

Features & Benefits: