Buy Products

T93R MAXX tips have a 7500 PSI (517 BAR) maximum working pressure for maximum pressure spray applications. This simple 3-component design makes tip changes on the job quick and safe. 

Part No: 207-XXX

See below for sizing chart.

T93R Safety Guard fits most major manufacturers’ airless spray guns. All metal parts are stainless steel for durability. Part No. 207999 – 7/8″ Thread Size 

The T-93R Sharp Liner is a tip designed for line striping roads, parking lots, runways, athletic fields, and interior floors of industrial warehouses. The spray pattern is designed to give sharp distinct lines with minimal overspray. TriTech’s unique manufacturing processes result in a precise fan width and flow rate which is unmatched in the industry. The TriTech Sharp Liner reversible and flat striping tips can be used on any airless line striping machine.

Part No: 202-XXX

See below for sizing chart.

The T93R Safety Guard fits most major manufacturer’s airless spray guns and accepts most tips. Large knurls for a sure grip. 5000 PSI (345 BAR). Can be used with Contractor Series, Ultra-Finish Series, Wide-Fan Series, and Sharp Liner Series. Part No. 200999 – 7/8″ Thread Size

Unique double-orifice atomizes the coating twice – each time finer than the first to achieve an ultra-fine finish. 28 fan pattern/orifice size combinations are available.
5000 PSI (345 BAR) 

Part No: 201-XXX

See below for sizing chart.

15 different combinations of wide fan patterns and large orifice sizes for high production jobs where you’ve got to “blow-and-go.” 5,000 PSI (345 BAR) 

Part No: 203-XXX

See below for sizing chart.

The new TeraValve™ abrasive metering valve is revolutionary in its ability to provide high performance, pressure hold blasting at a cost effective price point. The new Schmidt extended life (XL™) technology is incorporated for durability and long life, even when the valve is used with harsh abrasives. The compact size fits easily onto low clearance blast pots or blast cabinets without modification, making it easy to convert automatic blowdown pots to a more efficient and productive pressure hold system.

Piping Sizes: 3/4", 1", 1-1/4", 1-1/2"

*Replacement Parts and Repair Kits Available*

The Schmidt VBS II™ is the latest technology for suppressing the intensity of the air/energy during vessel depressurization of abrasive blasting systems. It is the only system specifically designed to safely reduce the noise levels and abrasive particle velocity (speeds) which occur during vessel blowdown.

Blowdown Hose Specs: 3/4" 4-Ply Blast Hose w/ ALHE1 fitting

*Repair Kits Available*

Perfectly suitable for the application of epoxy and water based thick-film materials and mortars, such as cement mortar, cement-bound fire protection materials, cement slurry and filled vinyl esters. In contrast to screw pumps, WIWA thick-film pumps can be flushed and cleaned with diluting agents. The pump is therefore also first choice when it comes to the transfer of epoxy based materials.

*Ready to Spray Upon Request*

The original Thompson Valve that revolutionized abrasive metering and control. Nothing matches the performance, reliability and durability of a genuine Schmidt® valve. Shuts off abrasive flow to the nozzle and seals the tank at the same instant.

Piping Sizes: 1” MNPT, 1-1/4” MNPT, 1-1/2” MNPT, 2” MNPT

*Replacement Parts and Repair Kits Available*

The next-generation valve in the Thompson Valve line. Shuts off abrasive flow to the nozzle and seals the tank at the same instant. Ideal for multiple outlet use. It offers significant improvements over the original Thompson Valve designed to improve performance, makes servicing easier, and extend service life. Faster response, finer control. The abrasive airblast industry's choice for abrasive metering and control.

Piping Sizes: 1” MNPT, 1-1/4” MNPT, 1-1/2” MNPT, 2” MNPT

*Replacement Parts and Repair Kits Available*

The newest advances in abrasive metering and control valve technology are incorporated in this valve. Shuts off abrasive flow to the nozzle and seals the tank in the same instant. This valve is designed to address the unique challenges of the harshest blasting environments including those operating continuously with aluminum oxide.

Nothing comes close to matching the performance, reliability, serviceability and life of this valve. If minimizing downtime and keeping your operation up and running are critical to you, you need this valve.

Piping Sizes: 1” MNPT, 1 1/4” MNPT, 1 1/2” MNPT, 2” MNPT

*Replacement Parts and Repair Kits Available*

A rugged, high-pressure pumping system, the TK 20 is Putzmeister’s answer for midrange pumping requirements. With an output of up to 13 m³/hr, it has superb control for the most critical geotechnical and compaction grouting applications. It can be fed by ready-mix truck, refractory mixer or its optional detachable mixer.

The Thom-Katt TK 20 Trailer-Mounted Concrete/Shotcrete Pump is ideal for wet-process refractory, underground and civil work.

Putzmeister's TK 7 is ideal for wet-process refractory applications. Its high performance, up to 5 m³/h, is coupled with the low operating costs of S-Valve pumps. Critical for safety, the pump is reversible at any point in the stroke, a feature not offered by mechanical pumps.

*Ready to Spray Upon Request*

Connects the Schmidt G2™ deadman to the blast pot to start and stop blasting remotely. This hose assembly includes four couplings, 2 of which are different sizes, to help ensure correct connection. 

Hose I.D.: 3/16"

Standard Length: 55' Section, 110' Section