Buy Concrete Equipment

In the Air Dryer System (ADS), the air rises through a bed of marbles and into deliquescent/dessicant tablets inside the tank before the air exits the vessel. Approximately 50% of residual moisture is removed (after cooling). Removed moisture is collected in the bottom of the separator tank. An after-filter removes particulates that may have become airborne, then used in the abrasive blasting operation.

Size Options:
250 cfm, 400 cfm, 750 cfm, 950 cfm, 1200 cfm, 1600 cfm, 2000 cfm, 2500 cfm

The operation of the AmphiBlast™ Lite is simple. Set the desired blast pressure using the blast pressure control regulator. Choose to blast dry or wet by pushing or pulling a button on the control panel. During wet abrasive blasting, simply dial the water pressure regulator to the desired flow rate represented by the water over air differential pressure gauge reading.

The AmphiBlast Lite comes in two options, standard with an onboard water tank and without.

The operation of the AmphiBlast™ Mini is simple. Set the desired blast pressure using the blast pressure control regulator. Choose to blast dry or wet by pushing or pulling a button on the control panel. During wet abrasive blasting, simply dial the water pressure regulator to the desired flow rate represented by the water over air differential pressure gauge reading.

The AmphiBlast Mini comes in two options, standard with an onboard water tank and without.

Crushed glass abrasives offer concrete workers an eco-friendly, silica-free solution for surface preparation. It provides precise blasting with minimal dust, improving job site safety and cleanliness. Ideal for removing coatings, rust, and contaminants, crushed glass helps achieve smooth, durable concrete surfaces without excessive wear.

Packaging: 56 x 50lb bags, 3,000lbs Bulk Bag, Bulk Per Ton 

*Sold by the pallet*

Van Air Systems' Dry-O-Lite is a low-cost absorbent deliquescent desiccant formulated for single and sequential tower dehydration systems. When used in a properly sized single or sequential tower desiccant air dryer, Dry-O-Lite will remove sufficient moisture vapor to establish a 55% RH in the air line.

Packaging: 50lb bag, 40 x 50lb bag

Crushed glass abrasives offer concrete workers an eco-friendly, silica-free solution for surface preparation. It provides precise blasting with minimal dust, improving job site safety and cleanliness. Ideal for removing coatings, rust, and contaminants, crushed glass helps achieve smooth, durable concrete surfaces without excessive wear.

Packaging: 63 x 50lb bags, 3,086lbs Bulk Bag

*Sold by the pallet*

The Schmidt® M-Series blasters add flexibility to your blasting operation. These multi-media units can be used with a wider range of abrasive media than standard blasters, including sodium bicarbonate, aluminum oxide, plastic, glass beads, crushed glass and even steel grit. Use a single system for all your jobs—from cleaning surface grease and oil, to stripping rust or paint. The M-Series can achieve the surface profile you need because you have the ability to use the abrasive best suited for the job.

Available Options: 0.9 cu.ft, 1.5 cu.ft, 2.0 cu.ft, 3.0 cu.ft

The Powercreter® Magnum is the most versatile concrete repair pump manufactured by Putzmeister. It’s ideal for wet-process shotcrete in Civil applications. The Magnum has a powerful 46 hp (34kW) Deutz diesel engine and conveys low slump concrete and packaged high-performance materials over long distances.

The Schmidt® M-Series blasters add flexibility to your blasting operation. These multi-media units can be used with a wider range of abrasive media than standard blasters, including sodium bicarbonate, aluminum oxide, plastic, glass beads, crushed glass and even steel grit. Use a single system for all your jobs—from cleaning surface grease and oil to stripping rust or paint. The M-Series can achieve the surface profile you need because you have the ability to use the abrasive best suited for the job.

The MP 25 guarantees maximum efficiency for processing premixed dry mortar. It comes with a complete set of accessories, so it’s ready for use as soon as it arrives. The pump is easy to disassemble and difficult to compete with. The reliable MP 25 is a compact, powerful machine for mixing and conveying dry mortars. It is suitable for a wide range of applications like exterior plastering with lime, lime cement, insulating plaster and interior plaster using gypsum and gypsum-lime plaster. Special applications include working with self-leveling compound, ETICS and calcium sulfate screed.

The proven high production of a TK 20 refractory pump combines with a 3,300 lb (1.5 mt) capacity pan-type mixer in a convenient, practical and functional configuration. This extremely versatile machine offers numerous features that together greatly simplify mobilization, setup, production and cleanup. Its production and reliability are unmatched by any other machine.

Features & Benefits:

• All functions easily controlled by one operator 
• Trailer-mounted and completely self-contained

Putzmeister has engineered the MRV-2200 Shear Force pan mixer to be high shear, high energy and extremely efficient. The MRV-2200 Shear Force is ideal for wet-process Refractory applications and is field proven to provide faster mixing times. The machine’s mixer discharge component easily fits over the hopper of a trailer- or forklift-mounted pump. An electric motor directly drives a heavy-duty planetary gear reducer, which drives a carousel-type arrangement of six mixing paddles.

Features & Benefits:

• Field-proven to provide faster mixing times 
• Engineered to be high-shear, high-energy and extremely efficient
  

The Allentown’s N-type Pneumatic gun is a modern version of the original cement gun built by Allentown for a century.

Features & Benefits:

• Most versatile machine available for the complete range of dry-process gunite, shotcrete and refractory applications.
• Ruggedly built to withstand hard, continuous use.
• Renowned for its ability to feed dry or damp, coarse or fine, and dense or lightweight materials at a smooth, accurately metered rate over 500' (152m) vertically or 1,000' (305m) horizontally.

This unit allows for the controlled addition of moisture to bagged material as it passes through the water ring. Pre-dampening eliminates static electricity while greatly reducing dust and rebound, providing greater visibility for the nozzleman.

Features & Benefits:

• Produces proper, in-place shotcrete
• Reduces wear on gun components

For use with packaged, pre-blended materials for shotcrete and
refractory applications.

Features & Benefits:

• Provides the opportunity to add a controlled amount of moisture to the bagged material as it is transported and fed into the gun.
• The addition of moisture, as much as 60 percent of the total water required, and the mixing action of the auger starts the hydration process long before the material reaches the nozzle.
• The controlled design or prebagged mixes ensure the amount of water added at the nozzle, in the split second that the material passes through the water ring,
• produces proper, in-place shotcrete.

The Putzmeister Piccola is built to the Swiss design with a vane air motor (250–600 cfm), flat hopper with bag breaker and screen, and 11/2" (38mm) outlet diameter as standard. It is a recommended machine for dry-process shotcrete in Refractory and Civil applications. Versatile and robust, this machine requires little maintenance and is easy to operate.

Features & Benefits:

• Variable speed electric motor, diesel engine, or no power (rig mounted)
• Rotor options including 12 round-half, 12 round-full, 9 round-full, pie-half and pie-full
• Slanted hopper with screen
• Forklift skid or foam-filled rubber tire mounting
• Dust suppression system
• Built to the Swiss design with a vane air motor (250-600 cfm)