Buy Concrete Equipment

Air-Cooled Aftercoolers use ambient air to lower the temperature of compressed air. These tools pass air over a set of warmed coils to condense any existing water vapor into liquid. This liquid is then removed through a drain within the unit's housing to prevent buildup within a larger compressed air system.

Options: 250 CFM, 375 CFM

Ease of operation and maintenance makes this unit a popular choice. It’s designed for high-volume sand/cement gunning work or refractory gunning. Ideal for use with the N-TYPE Pneumatic Gun, it will also feed any Putzmeister rotary gun.

Features & Benefits:

• Designed for high-volume sand/cement gunning work or refractory gunning.
• Ideal for use with the N-2 gun, but will also feed any Allentown rotary gun.
• Tandem trailer-mounted unit.
• Mixes and delivers 8 to 10 tons/hr (7-9 tonnes/hr).

Productive and long-lasting, the S5 series pumps and mixers are compact yet powerful, and can tackle a variety of materials with ease. Offering an array of capabilities, both the S5 gas and electric worm pumps have variable control. And can pump dry mix or wet mortar from bag or silo.

Electric Version: The number one choice of asbestos abatement respray applicators in North America, the electric S5 offers even more features — special Variable Frequency Drive (VFD) technology for infinite control from zero to full output, variable speed motor with gear drive, variable speed remote control, reversing feature and more.

Gas Version: Primarily for outside plaster and stucco, this 20 hp (15kW) gas version is also popular for pressure grout, vermiculite, swimming pool finish and pipe line refurbishment. This hydraulic drive offers the ease of fully variable output from zero to full volume and a reverse pump feature to relieve line pressure.

The comfortable SP 11 LMR worm pump has been specially designed to meet the needs for plastering, filling and grouting work. The pump can effortlessly convey material over distances of 60 m and to heights of 40 m. You can use site-made mixes or prebagged interior and external plasters, monocoat, fire-proofing mortar, base coat plaster, light-weight masonry mortar, ornamental mortar as well as filling and grouting work.

The powerful worm pump SP 25 DQR with compulsory mixer is suitable for a variety of other special applications such as concrete renovation or filling and grouting work, in addition to classic interior and exterior plastering. The increased efficiency focuses on higher throughputs, as well as longer conveying distances and higher delivery pressures.

Multicomponent materials and ready-mix dry mortar can be mixed on the construction
site in the powerful compulsory mixer for any mixing time. The lifting function of the mixer allows a lower filling height and permits the simple transfer of the mixed batch to the conveyor hopper.

Perfectly suitable for the application of epoxy and water based thick-film materials and mortars, such as cement mortar, cement-bound fire protection materials, cement slurry and filled vinyl esters. In contrast to screw pumps, WIWA thick-film pumps can be flushed and cleaned with diluting agents. The pump is therefore also first choice when it comes to the transfer of epoxy based materials.

Ratio Options: 9:1, 12:1

*Ready to Spray Upon Request*

A rugged, high-pressure pumping system, the TK 20 is Putzmeister’s answer for midrange pumping requirements. With an output of up to 13 m³/hr, it has superb control for the most critical geotechnical and compaction grouting applications. It can be fed by ready-mix truck, refractory mixer or its optional detachable mixer.

The Thom-Katt TK 20 Trailer-Mounted Concrete/Shotcrete Pump is ideal for wet-process refractory, underground and civil work.

Putzmeister's TK 7 is ideal for wet-process refractory applications. Its high performance, up to 5 m³/h, is coupled with the low operating costs of S-Valve pumps. Critical for safety, the pump is reversible at any point in the stroke, a feature not offered by mechanical pumps.

*Ready to Spray Upon Request*

Venturi nozzles are a crucial component in the sandblasting process, designed to maximize efficiency and performance. These nozzles accelerate the flow of abrasive material while minimizing air consumption. As air enters the nozzle, it creates a vacuum that draws in the abrasive, allowing for a powerful and controlled blast.

Our Venturi nozzles are available in various sizes and configurations to suit different applications, ensuring optimal performance for both light and heavy-duty projects. They are crafted from high-quality materials for durability and resistance to wear, making them ideal for a range of surface preparation tasks.

The Atlas Copco XAS 110 is a reliable and versatile air compressor designed to meet the demands of various applications, from construction to industrial operations. With a high air output of 110 CFM at 100 PSI, this compact, towable unit is ideal for powering pneumatic tools, sandblasting, and more. The XAS 110 features a fuel-efficient Kubota diesel engine, ensuring long operation times while minimizing fuel costs. Its robust design is built to withstand the toughest job site conditions, while easy access to service points ensures minimal downtime for maintenance.

The Atlas Copco XAS 188 is a reliable and versatile air compressor designed to meet the demands of various applications, from construction to industrial operations. With a high air output of 188 CFM at 100 PSI, this compact, towable unit is ideal for powering pneumatic tools, sandblasting, and more. The XAS 188 features a fuel-efficient Kubota diesel engine, ensuring long operation times while minimizing fuel costs. Its robust design is built to withstand the toughest job site conditions, while easy access to service points ensures minimal downtime for maintenance.