This miniBlaster is a pressure hold system. The blast pot retains pressure when the deadman control is released, minimizing abrasive loss with start-up and shut-down and providing faster response. Thompson® Valve II controls in either electric or pneumatic.

Package A: 150 psi rated vessel with electric deadman and 50' of cord/ pneumatic deadman and 55' of twinline

Package B: 150 psi rated vessel with electric deadman and 50' of cord/ pneumatic deadman and 55' of twinline, 50' of assembled blast hose, and nozzle

*Lid and Screen Sold Separately*

Ideal for small shops, monument frosting, shape carving or occasional blasting.

System Options: Pressure Hold (TeraValve™), Pressure Release (MV3™, ComboValve®, and VBS™II System)

Control Options: Electric, Pneumatic

Package A: 150 psi rated vessel with electric deadman and 50' of cord/ pneumatic deadman and 55' of twinline

Package B: 150 psi rated vessel, electric deadman and 50' of cord/ pneumatic deadman and 55' of twinline, 50' of blast hose assembly with nozzle

*Lid and Screen Sold Separately*

Flextral MH12R 2-Ply Sandblast Hose (Whip)

I.D. Options: 1/2", 3/4", 1", 1-1/4"

Fittings: Coupled upon request

Standard Length: Per Foot, 50' Section, 100' Section

Can be used with any electric remote control system. The 2-Wire Sealed Electric Deadman Control comes complete with 4' of cord, replaceable toggle switch boot, and Ball & Chain. Can be custom built with longer cord and quick disconnect

Compact contractor size, highly portable with good productivity for smaller projects.

System Options: Pressure Hold (TeraValve™), Pressure Release (MV3™, ComboValve®, and VBS™II System)

Control Options: Electric, Pneumatic

Package A: 150 psi rated vessel with electric deadman and 50' of cord/ pneumatic deadman and 55' of twinline

Package B: 150 psi rated vessel, electric deadman and 50' of cord/ pneumatic deadman and 55' of twinline, 50' of blast hose assembly with nozzle

*Lid and Screen Sold Separately*

Flextral MH14R 4-Ply Sandblast Hose

I.D. Options: 3/4", 1", 1-1/4", 1-1/2", 2"

Fittings: Coupled upon request

Standard Length: Per Foot, 50' Section, 100' Section

Most common contractor size, combining portability with productivity.

System Options: Pressure Hold (TeraValve™), Pressure Release (MV3™, ComboValve®, and VBS™II System)

Control Options: Electric, Pneumatic

Package A: 150 psi rated vessel with electric deadman and 50' of cord/ pneumatic deadman and 55' of twinline

Package B: 150 psi rated vessel, electric deadman and 50' of cord/ pneumatic deadman and 55' of twinline, 50' of blast hose assembly with nozzle

*Lid and Screen Sold Separately*

In the Aftercooler System (ACS), the air rises through a stainless steel particulate filter that attracts condensed moisture. Removed moisture is collected in the bottom of the separator tank. The dryer, cooler air then exits the tank for use in the abrasive blasting operation.

Size Options:
250 cfm, 400 cfm, 750 cfm, 950 cfm, 1200 cfm, 1600 cfm, 2000 cfm, 2500 cfm

In the Air Dryer System (ADS), the air rises through a bed of marbles and into deliquescent/desiccant tablets inside the tank before the air exits the vessel. Approximately 50% of residual moisture is removed (after cooling). Removed moisture is collected in the bottom of the separator tank. An after-filter removes particulates that may have become airborne, then used in the abrasive blasting operation.

Size Options:
250 cfm, 400 cfm, 750 cfm, 950 cfm, 1200 cfm, 1600 cfm, 2000 cfm, 2500 cfm

The operation of the AmphiBlast™ Mini is simple. Set the desired blast pressure using the blast pressure control regulator. Choose to blast dry or wet by pushing or pulling a button on the control panel. During wet abrasive blasting, simply dial the water pressure regulator to the desired flow rate represented by the water over air differential pressure gauge reading.

The AmphiBlast Mini comes in two options, standard with an onboard water tank and without.

The operation of the AmphiBlast™ Lite is simple. Set the desired blast pressure using the blast pressure control regulator. Choose to blast dry or wet by pushing or pulling a button on the control panel. During wet abrasive blasting, simply dial the water pressure regulator to the desired flow rate represented by the water over air differential pressure gauge reading.

The AmphiBlast Lite comes in two options, standard with an onboard water tank and without.

Unlike other blast systems that mix abrasive and water inside the vessel, the AmphiBlast system injects water into the blast stream after the metering valve, using a patent-pending, user-friendly and uniquely precise water injection system. With this system, you can quickly and consistently control every aspect: fine-tune air, abrasive, and water flows to achieve optimal blasting performance, all while maintaining efficient use of abrasive and water. Switch between wet or dry blast, blowoff, and Softwash™ without having to reset your air, abrasive, or water, using a central, easy-to-use gauge console.

Unlike other blast systems that mix abrasive and water inside the vessel, the AmphiBlast system injects water into the blast stream after the metering valve, using a patent-pending, user-friendly and uniquely precise water injection system. With this system, you can quickly and consistently control every aspect: fine-tune air, abrasive, and water flows to achieve optimal blasting performance, all while maintaining efficient use of abrasive and water. Switch between wet or dry blast, blowoff, and Softwash™ without having to reset your air, abrasive, or water, using a central, easy-to-use gauge console.

Unlike other blast systems that mix abrasive and water inside the vessel, the AmphiBlast system injects water into the blast stream after the metering valve, using a patent-pending, user-friendly and uniquely precise water injection system. With this system, you can quickly and consistently control every aspect: fine-tune air, abrasive, and water flows to achieve optimal blasting performance, all while maintaining efficient use of abrasive and water. Switch between wet or dry blast, blowoff, and Softwash™ without having to reset your air, abrasive, or water, using a central, easy-to-use gauge console.

Features & Benefits:

• Operate up to three nozzles/outlets simultaneously
• Independently set each nozzle for wet blast, dry blast, softwash or blowoff
• Greater abrasive capacity for increased productivity
• The HALOK® system mechanically requires the operator to follow proper procedure in order to open the 10" closure
• The CEN™ blowdown system reduces blowdown noise levels to approximately 92 dba (equivalent to traffic noise) and prevents frost buildup, which has been reported to retain dangerous pressure in the vessel
• The Ergo-Ladder is a curved ladder with non-slip rungs, grab handle, and attachment point for fall protection systems. It makes for easier, safer and more comfortable access to the 10" closure
• The Manway Stay Bracket automatically retains the manway cover for easier, error-free installation 

*Optional Trailer Mount Available*

Angle nozzles are designed for precision and versatility in sandblasting applications, offering a unique solution for hard-to-reach areas and complex surfaces. With an angled tip that allows for optimal directional control, these nozzles enable operators to effectively target specific spots while minimizing over-spray and maximizing abrasive efficiency.

The Schmidt® Auto Air Valve is typically used on “pressure hold” systems in conjunction with the Thompson®/TeraValve™ family of abrasives metering valves.

Standard Options: 3/4", 1-1/4", 1-1/2"

High Flow Options: 1-1/2", 2"

*Repair Kits Available*