Buy Blasting Equipment

  • Aftercooler Systems (ACS)

    Description

    In the Aftercooler System (ACS), the air rises through a stainless steel particulate filter that attracts condensed moisture. Removed moisture is collected in the bottom of the separator tank. The dryer, cooler air then exits the tank for use in the abrasive blasting operation.

    Size Options:
    250 cfm, 400 cfm, 750 cfm, 950 cfm, 1200 cfm, 1600 cfm, 2000 cfm, 2500 cfm

    Technical information

    Download PDF
  • Air Drying Systems (ADS)

    Description

    In the Air Dryer System (ADS), the air rises through a bed of marbles and into deliquescent/desiccant tablets inside the tank before the air exits the vessel. Approximately 50% of residual moisture is removed (after cooling). Removed moisture is collected in the bottom of the separator tank. An after-filter removes particulates that may have become airborne, then used in the abrasive blasting operation.

    Size Options:
    250 cfm, 400 cfm, 750 cfm, 950 cfm, 1200 cfm, 1600 cfm, 2000 cfm, 2500 cfm

    Technical information

    Download PDF
  • AirGladiator Airline Filter

    Description

    Bullard’s AirGladiator provides 7-stage filtration to the required Grade D breathable air, that when combined with carbon monoxide (CO) monitoring and other safeguards, provides users with cleaner, more comfortable air.

     

    Featured & Benefits:

    • Rugged construction with mounting versatility
      Portable
    • Anti-tip design
    • Heavy Duty

    Options: 2-Outlet, 6-Outlet

  • AirGuard Gas & Environmental Monitor

    Description

    Bullard AirGuard monitors carbon monoxide and dew point monitor or water vapor in your airline keeping breathing air clean and your equipment protected.

    Features & Benefits:

    • Made with a Rugged Pelican® case
    • 7” Backlit Color Display with Visual Alarms
    • Audible Alarm Warnings
    • Remote Alarm available
    • Filter Change Indicator
    • Wilkerson 3 Stage Filtration System That Removes Oil, Water, Solid Particles, Unpleasant Odor and Taste from the System
    • Includes Pressure Regulator
    • CO and Differential Dew Point Sensors
    • Relief Valve
    • Portable – Battery-Operated, Rechargeable
    • External Quick Connect Calibration Port
    • Removable Data Logging USB Drive
    • Housing for Data Logging USB and 7” BackLit Color Display

    Technical information

    Download PDF
  • Aluminum Blast Coupling (Full Port)

    Description

    Options:

    • Q1X Blast Coupling, 3/4″ Hose ID x 1-1/2″ Hose OD (1-3/4″ Gasket ID)
    • Q2X Blast Coupling, 1" Hose ID x 1-7/8" Hose OD (1-3/4" Gasket ID)
    • Q3X Blast Coupling, 1-1/4″ Hose ID x 2-5/32″ Hose OD (1-3/4″ Gasket ID)
    • Q4X Blast Coupling, 1-1/2″ Hose ID x 2-3/8″ Hose OD (1-3/4″ Gasket ID)
    • Q6X Blast Coupling, 2″ Hose ID x 2-7/8″ Hose OD (1-3/4″ Gasket ID)
  • Aluminum Blast Coupling (Standard)

    Description

    Options:

    • Q05 Blast Coupling, 1/2" Hose ID x 1-3/16" Hose OD (1-1/4" Gasket ID)
    • Q1 Blast Coupling, 3/4″ Hose ID x 1-1/2″ Hose OD (1-1/4″ Gasket ID)
    • Q2 Blast Coupling, 1" Hose ID x 1-7/8" Hose OD (1-1/4" Gasket ID)
    • Q3 Blast Coupling, 1-1/4″ Hose ID x 2-5/32″ Hose OD (1-1/4″ Gasket ID)
    • Q4 Blast Coupling, 1-1/2″ Hose ID x 2-3/8″ Hose OD (1-1/4″ Gasket ID)
  • Aluminum Nozzle Holder (Coarse Thread)

    Description

    Options:

    • MHE1 Nozzle Holder, 3/4″ Hose ID x 1-1/2″ Hose OD (50mm Threads)
    • MHE2 Nozzle Holder, 1″ Hose ID x 1-7/8″ Hose OD (50mm Threads)
    • MHE3 Nozzle Holder, 1-1/4″ Hose ID x 2-5/32″ Hose OD (50mm Threads)
    • MHE4 Nozzle Holder, 1-1/2″ Hose ID x 2-3/8″ Hose OD (50mm Threads)
  • Aluminum Nozzle Holder (Fine Thread)

    Description

    Options:

    • HE05 Nozzle Holder, 1/2" Hose ID x 1-3/16" Hose OD (3/4" NPS)
    • HE1 Nozzle Holder, 3/4″ Hose ID x 1-1/2″ Hose OD (1-1/4″ NPS)
    • HE2 Nozzle Holder, 1″ Hose ID x 1-7/8″ Hose OD (1-1/4″ NPS)
    • HE3 Nozzle Holder, 1-1/4″ Hose ID x 2-5/32″ Hose OD (1-1/4″ NPS)
    • HE4 Nozzle Holder, 1-1/2″ Hose ID x 2-3/8″ Hose OD (1-1/4″ NPS)
  • Aluminum Threaded Blast Coupling (Full Port)

    Description

    Options:

    • SB3X Threaded Coupling, 1-1/2" NPT (1-3/4" Gasket ID)
    • SB4X Threaded Coupling, 2" NPT (1-3/4" Gasket ID)
  • Aluminum Threaded Blast Coupling (Standard)

    Description

    Options:

    • SB1 Threaded Coupling, 1-1/4″ NPT (1-1/4″ Gasket ID)
    • SB2 Threaded Coupling, 1-1/2″ NPT (1-1/4″ Gasket ID)
  • AmphiBlast™ Mini

    Description

    The operation of the AmphiBlast™ Mini is simple. Set the desired blast pressure using the blast pressure control regulator. Choose to blast dry or wet by pushing or pulling a button on the control panel. During wet abrasive blasting, simply dial the water pressure regulator to the desired flow rate represented by the water over air differential pressure gauge reading.


    The AmphiBlast Mini comes in two options, standard with an onboard water tank and without.

    Technical information

    Download PDF
  • AmphiBlast™ Lite

    Description

    The operation of the AmphiBlast™ Lite is simple. Set the desired blast pressure using the blast pressure control regulator. Choose to blast dry or wet by pushing or pulling a button on the control panel. During wet abrasive blasting, simply dial the water pressure regulator to the desired flow rate represented by the water over air differential pressure gauge reading.

    The AmphiBlast Lite comes in two options, standard with an onboard water tank and without.

    Technical information

    Download PDF
  • AmphiBlast™ Single-Outlet Skid

    Description

    Unlike other blast systems that mix abrasive and water inside the vessel, the AmphiBlast system injects water into the blast stream after the metering valve, using a patent-pending, user-friendly and uniquely precise water injection system. With this system, you can quickly and consistently control every aspect: fine-tune air, abrasive, and water flows to achieve optimal blasting performance, all while maintaining efficient use of abrasive and water. Switch between wet or dry blast, blowoff, and Softwash™ without having to reset your air, abrasive, or water, using a central, easy-to-use gauge console.

    Technical information

    Download PDF
  • AmphiBlast™ Dual-Outlet Skid

    Description

    Unlike other blast systems that mix abrasive and water inside the vessel, the AmphiBlast system injects water into the blast stream after the metering valve, using a patent-pending, user-friendly and uniquely precise water injection system. With this system, you can quickly and consistently control every aspect: fine-tune air, abrasive, and water flows to achieve optimal blasting performance, all while maintaining efficient use of abrasive and water. Switch between wet or dry blast, blowoff, and Softwash™ without having to reset your air, abrasive, or water, using a central, easy-to-use gauge console.

    Technical information

    Download PDF
  • AmphiBlast™ Bulk Blast Pot

    Description

    Unlike other blast systems that mix abrasive and water inside the vessel, the AmphiBlast system injects water into the blast stream after the metering valve, using a patent-pending, user-friendly and uniquely precise water injection system. With this system, you can quickly and consistently control every aspect: fine-tune air, abrasive, and water flows to achieve optimal blasting performance, all while maintaining efficient use of abrasive and water. Switch between wet or dry blast, blowoff, and Softwash™ without having to reset your air, abrasive, or water, using a central, easy-to-use gauge console.

    Features & Benefits:

    • Operate up to three nozzles/outlets simultaneously
    • Independently set each nozzle for wet blast, dry blast, softwash or blowoff
    • Greater abrasive capacity for increased productivity
    • The HALOK® system mechanically requires the operator to follow proper procedure in order to open the 10" closure
    • The CEN™ blowdown system reduces blowdown noise levels to approximately 92 dba (equivalent to traffic noise) and prevents frost buildup, which has been reported to retain dangerous pressure in the vessel
    • The Ergo-Ladder is a curved ladder with non-slip rungs, grab handle, and attachment point for fall protection systems. It makes for easier, safer and more comfortable access to the 10" closure
    • The Manway Stay Bracket automatically retains the manway cover for easier, error-free installation 

    *Optional Trailer Mount Available*

    Technical information

    Download PDF
  • Angle Nozzles

    Description

    Angle nozzles are designed for precision and versatility in sandblasting applications, offering a unique solution for hard-to-reach areas and complex surfaces. With an angled tip that allows for optimal directional control, these nozzles enable operators to effectively target specific spots while minimizing over-spray and maximizing abrasive efficiency.