Buy Blasting Equipment

The GX4 detects multiple gases simultaneously and displays data in real time. Sensors currently available include CO, O2 and H2S.

Features & Benefits:

• Illuminated display shows real time gas levels
  
• 103DBA alarm
• Sturdy mounting bracket
  
• Gas sensor cartridges can be easily removed and replaced
• GX4 housing and sensor cartridges are made from reinforced polypropylene that will handle harsh conditions
• Push-release air inlet
• Robust power inlet
• Auxilliary connection
• Pre-calibrated sensors available include include CO, O2 and H2S - all have a two year shelf life

HoldTight® 102 completely removes all salts, resulting in no conductivity. It also removes abrasives and debris from the surface’s profile providing a better surface area to bond with coating. Since HoldTight® 102 leaves a clean, rust-free surface for up to 72 hours, large areas of structures can be blasted and cleaned completely before coating application, instead of having to be coated immediately after blasting every day.

Options: 5 Gallon, 55 Gallon

Adjustable hose clamp 2-1/2". 2 required for G3 Deadman.

Part No: 4229510

NIOSH-approved accessory for use with certain SAR systems to supply a continuous flow or warm or cool air.

The RPB® Hot Air Tube Assembly warms compressed breathing air coming into respirators by as much as 30 °F(17 °C)

The “TOUGHest” Portable LED Work Lights on the market. As portable luminaries, each light is built to provide “tool-like” reliability. They set the new standard for excellence reducing job site safety risks with easy-to-calculate ROI. Versatile mounting options allow for quick & easy positioning.

KICK-IT TOUGH™ Series Includes:

• The BRICK®
• The BRICKette™
• The STRIKER™
• BODYLight™
• BRICKSkid™

The Schmidt® M-Series blasters add flexibility to your blasting operation. These multi-media units can be used with a wider range of abrasive media than standard blasters, including sodium bicarbonate, aluminum oxide, plastic, glass beads, crushed glass and even steel grit. Use a single system for all your jobs—from cleaning surface grease and oil, to stripping rust or paint. The M-Series can achieve the surface profile you need because you have the ability to use the abrasive best suited for the job.

Available Options: 0.9 cu.ft, 1.5 cu.ft, 2.0 cu.ft, 3.0 cu.ft

The original Schmidt metering valve. Provides total control of the quantity of abrasive media used. Near-infinite metering capability. Suitable for use with a range of abrasives. Normally open.

Nipple Sizes: 1-1/2" x 1-1/4", 1-1/2" x 1-1/2"

*Replacement Parts and Repair Kits Available*

The next-generation valve in the MicroValve® line. Provides near-infinite, precise metering of abrasive media. This valve incorporates numerous improvements designed to increase performance, and make the valve easier to use, easier to service. Suggested for use with the ComboValve® control valve.

Inlet: 1-1/4" NPT

Piping Sizes: 1-1/4", 1-1/2"

*Replacement Parts and Repair Kits Available*

The Schmidt® MV3™ abrasive metering valve is the newest innovation in the family of industry-leading Schmidt abrasive metering valves. The MV3 offers the proven productivity and safety advantages that Schmidt valves deliver to abrasive blasting operations through the precise metering of abrasive, along with extended service life, an improved cleanout port, and easy access to wear components for safe, efficient maintenance.

Inlet: 1-1/4" NPT

Piping Sizes: 1-1/4", 1-1/2"

*Replacement Parts and Repair Kits Available*

The Schmidt® M-Series blasters add flexibility to your blasting operation. These multi-media units can be used with a wider range of abrasive media than standard blasters, including sodium bicarbonate, aluminum oxide, plastic, glass beads, crushed glass and even steel grit. Use a single system for all your jobs—from cleaning surface grease and oil to stripping rust or paint. The M-Series can achieve the surface profile you need because you have the ability to use the abrasive best suited for the job.

The miniBRS™ system is a compact and easily maneuverable abrasive blaster that blasts and recovers spent abrasive, contaminants and dust in the same step, eliminating the need for containment. It can also blast or vacuum separately for
increased versatility. Unlike other systems on the market, the miniBRS has an ergonomic design, a lightweight yet durable blast head, and smaller diameter, lighter weight hoses that are sized to match the system. The new blast/vacuum head features a 40% larger blast pattern, an ultra-comfortable trigger-style deadman control that allows one-handed start/stop and the ability to blast high-temperature surfaces, using an optional adapter/brush. Blast and recover at up to 200 feet away from the unit. It can operate on just a 185 cfm compressor.

The trigger style design allows the operator to use the grip hand to control blast on/off control while leaving the other hand free to be on the blast head and to push the G2 safety button. This ergonomic improvement provides a more secure and more comfortable two hand grip on the blast head. Also, having two hands on the blast head allows for the operator to move and manipulate the blast head.

Options: Flat Brush, Inside Corner Brush, Outside Corner Brush, Hi-Temp Brush

This “No-Air” LED abrasive blast light is the highest performing light for blasting in its class. It packs a big punch using 6 LED’s with a (Now Improved) refracted optical design. These clearer optics create a more targeted focus with a 25° beam angle. The light body is made of durable, machined aluminum and polyurethane-wrapped for extra safety and durability.

*Accessories and parts sold separately*

Features & Benefits:

• Field-Repairable
• Replaceable foot mount
• Exclusive double lens to protect LED light
• Works with any controls
• No tools required to change lens
• Waterproof (IP69K Rating)
• 12 – 24 VDC Dual Voltage

*Accessories and parts sold separately*

Helps reduce the amount of moisture in the blasting system, for smoother flow of abrasives and reduced contamination of controls. Suitable for drier, more arid environments where the level of performance offered by an AirPrep Aftercooler or Air Dryer may not be needed.