This lens sits just inside the seal of the helmet.

Packaging: 25 Pack, Box of 8 Packs

Suited for 88VX Respirator System. Sold individually.

Length: 28", 38"

The outer lens snaps in behind the tear-off lenses (if applicable) in the helmet's face mask. If you don't use tear-off lenses, this will be the main lens in the front of the helmet. 

Packaging: 25 Pack, Box of 8 Packs

Snap the tear-off lenses in the helmet's mask first before the outer lens. Each lens has individually pre-folded tabs ensuring that workers tear off only one lens at a time.

Packaging: 25 Pack, Box of 10 Packs

In the Aftercooler System (ACS), the air rises through a stainless steel particulate filter that attracts condensed moisture. Removed moisture is collected in the bottom of the separator tank. The dryer, cooler air then exits the tank for use in the abrasive blasting operation.

Size Options:
250 cfm, 400 cfm, 750 cfm, 950 cfm, 1200 cfm, 1600 cfm, 2000 cfm, 2500 cfm

In the Air Dryer System (ADS), the air rises through a bed of marbles and into deliquescent/desiccant tablets inside the tank before the air exits the vessel. Approximately 50% of residual moisture is removed (after cooling). Removed moisture is collected in the bottom of the separator tank. An after-filter removes particulates that may have become airborne, then used in the abrasive blasting operation.

Size Options:
250 cfm, 400 cfm, 750 cfm, 950 cfm, 1200 cfm, 1600 cfm, 2000 cfm, 2500 cfm

Behind insufficient air supply, moisture is the second largest enemy to blasting productivity. Wet air causes flash rusting, clogs blast pots with damp abrasives, damages control valves, and reduces blasting productivity. Blasting operations that simply add a Schmidt® AirPrep System have documented increased production of 12 to 15%.

Size Options: 250 cfm, 400 cfm, 950 cfm, 1600 cfm

*Rental comes filled with desiccant, additional desiccant used to refill the unit will be an additional charge*

600 PSI Wire Braided Air Hose (Bull Hose)

I.D. Options: 1", 2", 3"

Standard Length: 50' Section, 100' Section 

Bullard’s AirGladiator provides 7-stage filtration to the required Grade D breathable air, that when combined with carbon monoxide (CO) monitoring and other safeguards, provides users with cleaner, more comfortable air.

Featured & Benefits:

• Rugged construction with mounting versatility
  Portable
  
• Anti-tip design
  
• Heavy Duty

Options: 2-Outlet, 6-Outlet

The Bullard replacement airline filter cartridge comes with 7-stage replacement filter cartridge that removes moisture and particulates to 0.5 microns and odor from the compressed air stream.

Options:

• Q1X Blast Coupling, 3/4″ Hose ID x 1-1/2″ Hose OD (1-3/4″ Gasket ID)
• Q2X Blast Coupling, 1" Hose ID x 1-7/8" Hose OD (1-3/4" Gasket ID)
• Q3X Blast Coupling, 1-1/4″ Hose ID x 2-5/32″ Hose OD (1-3/4″ Gasket ID)
• Q4X Blast Coupling, 1-1/2″ Hose ID x 2-3/8″ Hose OD (1-3/4″ Gasket ID)
• Q6X Blast Coupling, 2″ Hose ID x 2-7/8″ Hose OD (1-3/4″ Gasket ID)

Options:

• Q05 Blast Coupling, 1/2" Hose ID x 1-3/16" Hose OD (1-1/4" Gasket ID)
• Q1 Blast Coupling, 3/4″ Hose ID x 1-1/2″ Hose OD (1-1/4″ Gasket ID)
• Q2 Blast Coupling, 1" Hose ID x 1-7/8" Hose OD (1-1/4" Gasket ID)
• Q3 Blast Coupling, 1-1/4″ Hose ID x 2-5/32″ Hose OD (1-1/4″ Gasket ID)
• Q4 Blast Coupling, 1-1/2″ Hose ID x 2-3/8″ Hose OD (1-1/4″ Gasket ID)

Options:

• MHE1 Nozzle Holder, 3/4″ Hose ID x 1-1/2″ Hose OD (50mm Threads)
• MHE2 Nozzle Holder, 1″ Hose ID x 1-7/8″ Hose OD (50mm Threads)
• MHE3 Nozzle Holder, 1-1/4″ Hose ID x 2-5/32″ Hose OD (50mm Threads)
• MHE4 Nozzle Holder, 1-1/2″ Hose ID x 2-3/8″ Hose OD (50mm Threads)

Options:

• HE05 Nozzle Holder, 1/2" Hose ID x 1-3/16" Hose OD (3/4" NPS)
• HE1 Nozzle Holder, 3/4″ Hose ID x 1-1/2″ Hose OD (1-1/4″ NPS)
• HE2 Nozzle Holder, 1″ Hose ID x 1-7/8″ Hose OD (1-1/4″ NPS)
• HE3 Nozzle Holder, 1-1/4″ Hose ID x 2-5/32″ Hose OD (1-1/4″ NPS)
• HE4 Nozzle Holder, 1-1/2″ Hose ID x 2-3/8″ Hose OD (1-1/4″ NPS)

Recommended for surface preparation and anti skid applications.

Mesh Size: #100 - Available in sizes 16-240 mesh

Packaging: 40 x 50lb Bags, 3,080lb Bulk Bag

Sold by the pallet

Abrasive blasting dust can cause serious injury or death. OSHA requires a Type CE NIOSH-certified airline respirator with a positive pressure blasting helmet for protection.