207® by CleanWrx Solutions provides the only health, safety, and environmentally conscious metal surface preparation solution to exceed the highest standards for corrosion elimination, even in the most challenging heavy-industrial environments. 

The one step application process decontaminates surfaces at the molecular level, eliminating visually undetectable levels of highly corrosive substances, providing a uniform receptive surface prior to coatings application, and greatly increasing coating adhesion with NO film formers.

Options: 1 Gallon, 5 Gallon, 42 Gallon, 275 Gallon

Behind insufficient air supply, moisture is the second largest enemy to blasting productivity. Wet air causes flash rusting, clogs blast pots with damp abrasives, damages control valves, and reduces blasting productivity. Blasting operations that simply add a Schmidt® AirPrep System have documented increased production of 12% to 15%.

*Rental comes filled with desiccant, additional desiccant used to refill the unit will be an additional charge*

Handy Airless spray gun for fine spray painting tasks and high area output. 

Features & Benefits:

• 4,351 PSI (300 BAR) 
• Ergonomic Handle
• 2-Finger Trigger

Fuel Not Included.

Fuel Type: Diesel

The WIWA Inject 2K Inject pump is a pneumatic 2K piston pump in mixing ratio 1:1. The material pumps are connected to the air motor, so that no mixing errors occur due to the positive control. The unit is equipped with a flush pump for quick cleaning of the A and B components for the mixing unit.

*Ready to Spray Upon Request*

Service kit for Western Tech 3-Wire Repairable Electric Deadman Control. Includes: Switch, Boot, Jumper, and 4' Wire.

Designed specifically for abrasive blasting with a three-wire system and can be custom built with a longer cord and quick disconnect. *Repair Kits Sold Separately*

Features & Benefits:

• Compact size
• Proven components
• Simple to repair
• Dust & Water resistant
• The ORIGINAL "Repairable" Deadman Control
  

Compact contractor size, highly portable with good productivity for smaller projects.

System Options: Pressure Hold (TeraValve™), Pressure Release (MV3™, ComboValve®, and VBS™II System)

Control Options: Electric, Pneumatic

Package A: 150 psi rated vessel with electric deadman and 50' of cord/ pneumatic deadman and 55' of twinline

Package B: 150 psi rated vessel, electric deadman and 50' of cord/ pneumatic deadman and 55' of twinline, 50' of blast hose assembly with nozzle

*Lid and Screen Sold Separately*

Compact contractor size, highly portable with good productivity for smaller projects. System and Control options are subject to availability. 

System Options: Pressure Hold, Pressure Release

Control Options: Electric, Pneumatic

Rentals Include *Hose Size Depends on Air Supply*:

• 3/4" or 1-1/4" x 50' 4-Ply Blast Hose Coupled
• 1-1/4" x 15' 2-Ply Whip Coupled
• Electric Deadman and Cord, Pneumatic Deadman and Twinline
• Nozzle

Ideal for large sized jobs that require high ventilation. Available in Diesel.

AR67 Yellow 300 PSI Textile Braid Assembly

I.D. Options: 2", 3"

Fittings: FGJ E/E w/ 4-Bolt Clamps, AM28 w/ 4-Bolt Clamps

Standard Length: 25' Section, 50' Section, 100' Section 

AR20 Red 300 PSI Air Hose 

I.D. Options: 3/4", 1"

Fittings: AM6 E/E Crimped, AM11 E/E Crimped

Standard Length: 25' Section, 50' Section, Bulk Rolls

Additional Bulk Rolls: 1/4", 3/8", 1/2", 1-1/4", 1-1/2"

30/40 can be used for the same applications as GX1 SpeedBlast™. 3040 is a fast cleaning, general purpose abrasive for a wide variety of less challenging industrial blasting requirements. It offers exceptionally fast blasting performance for removal of light to medium coatings and/or rust. 

Mesh Size: #30/40

Surface Profile: 2.0 - 3.0 mils

Packaging: 40 x 55lb Bags, 2,200lb Bulk Bag, 4,400lb Bulk Bag

Sold by the pallet

Abrasive blasting dust can cause serious injury or death. OSHA requires a Type CE NIOSH-certified airline respirator with a positive pressure blasting helmet for protection.

Flextral MH14R 4-Ply Sandblast Hose

I.D. Options: 3/4", 1", 1-1/4", 1-1/2", 2"

Fittings: Coupled upon request

Standard Length: Per Foot, 50' Section, 100' Section

Flextral MH14R 4-Ply Sandblast Hose Coupled

I.D. Options: 3/4", 1", 1-1/4", 1-1/2"

Standard Length: 50' Section, 100' Section

Designed for large projects, the patented cleaning system achieves levels of grit cleanliness that are unparalleled in the industry. 

Features & Benefits:

• 3,800 CFM 28” High Vacuum
• 4 or 6 Nozzle Configuration Continuous Blasting System
• 40 Barrels of Abrasive Storage
• Complete Air Drying System with Desiccant Dryers
• Patented Cleaning Process
• Multistage Air Wash System with Separate Baghouse

Rentals Include (per outlet):

• 1-1/4" x 50' 4-Ply Blast Hose Coupled
• 1-1/4" x 15' 2-Ply Whip Coupled
• Electric Deadman and Cord
• Nozzle

*Trained Operator Required*