Fittings: Female X Female

Size: 1/4", 3/8", 1/2"

Max Working Pressure: 6,500 PSI - 10,000 PSI

Fittings: Female X Female

Size: 1/4", 3/8", 1/2"

Max Working Pressure: 3,500 PSI - 6,170 PSI

Fittings: Female X Female Spring Guard

Size: 1/4", 3/8"

Max Working Pressure: 3,500 PSI - 4,000 PSI

Handy Airless spray gun for fine spray painting tasks and high area output. 

Features & Benefits:

• 4,351 PSI (300 BAR) 
• Ergonomic Handle
• 2-Finger Trigger

WIWA 500 D Airless high-performance gun with WIWA swivel joint and light-moving four-finger trigger. 

Features & Benefits:

• 7,250 PSI (500 BAR) 
• 4-Finger Trigger
• Standard Handle

WIWA 500F airless spray gun with return flow distributor for hot spraying systems. Connects to fluid port in front of gun, rather than material running through handle.

Features & Benefits:

• 7,250 PSI (500 BAR) 

Handle Options: Standard Handle, Ergonomic Handle

Trigger Options (Standard Handle): 2-Finger Trigger, 4-Finger Trigger

WIWA 500 F PFP Passive Fire Protection High Performance Air Combi automatic spray gun for fully and semi-automatic spray painting systems and spray painting robots.

Features & Benefits:

• 7,250 PSI (500 BAR) 
• 4-Finger Trigger
• Standard Handle

Bullard’s AirGladiator provides 7-stage filtration to the required Grade D breathable air, that when combined with carbon monoxide (CO) monitoring and other safeguards, provides users with cleaner, more comfortable air.

Featured & Benefits:

• Rugged construction with mounting versatility
  Portable
  
• Anti-tip design
  
• Heavy Duty

Options: 2-Outlet, 6-Outlet

Tip extensions give you extra reach for spraying soffits, high ceilings, and reduce back fatigue when spraying floors and decks. Moving the spray head away from you also keeps you and your equipment cleaner. Includes T93R Tip guard.
4200 PSI (290 BAR)

Options: 6", 10", 15", 20", 30", 39"

The female ball valve assemblies shown below work with paint, petroleum-based hydraulic fluids, fuel oil, and air.

Inlet / Outlet: 1/4", 3/8", 1/2", 3/4", 1"

Working Pressure:  3,600 psi, 4,500 psi, 5,800 psi, 7,250 psi

The male ball valve assemblies shown below work with paint, petroleum-based hydraulic fluids, fuel oil, and air.

Inlet / Outlet: 1/4", 3/8"

Working Pressure: 7,250 psi

Hose I.D. 3/8" diameter with 1/4" quick-connect fittings.

Standard Length: 25' Section, 50' Section, 100' Section

With just the press of a lever, the C40 can cool incoming air by up to 52˚F (29˚C) or heat it by up to 33˚F (18˚C), allowing you to stay comfortable in even the most extreme temperatures.

The CC20-series respirator hood provides a variety of comfortable, effective, and economical variations suitable for your application. From pharmaceutical manufacturing to painting, spray foam, and chemical handling applications, this respirator hood offers proven comfort.

Tychem® Cape Options: 2000, 4000, Single Bib, Double Bib

Air Supply: Cool Tube (SAR), Hot/Cold Tube (SAR), EVA (PAPR)

*Lenses sold separate*

Bullard Cool Tubes cool incoming air from breathing air sources by as much as 20-30° F (11-17° C). These cool tubes feature adjustable airflow control valves that allow the user to adjust the incoming air temperature to a level best suited to individual comfort.

Plural component spray units are custom spray systems typically used on large commercial painting jobs. These units use two or more coatings, like epoxy or polyurethanes, which are then combined and sprayed simultaneously on a surface.

*Ready To Spray Upon Request*