Snap the tear-off lenses in the helmet's green mask first before the outer lens. Each lens has individually pre-folded tabs ensuring that workers tear off only one lens at a time.

Packaging: Pack of 50, Box of 20 Packs

Operator visibility has been at the forefront of the Nova 3 design, and has been achieved by incorporating a large panoramic visor. This provides operators with an uncompromised field of view, which supports greater and precision when blasting. The NOVA 3® comes with Nylon Cape and Climate Control Device of choice.

Climate Control: Cold Air Tube, Hot Air Tube, C40 Climate Control Device

Suited for NOVA 3® Respirator System. Sold individually.

Size: XL, XXL

Suited for NOVA 3® Respirator System. Sold individually.

Material: Leather, Nylon

Length: Standard, Extra Length

Each individually wrapped cassette lens system includes five tear-off lenses sealed to one outer lens.

Packaging: Box of 20 Packs

This lens sits just inside the black seal of the helmet.

Packaging: 10 Pack, Box of 20 Packs

The outer lens snaps in behind the tear-off lenses (if applicable) in the helmet's green face mask. If you don't use tear-off lenses, this will be the main lens in the front of the helmet. 

Packaging: 50 Pack, Box of 10 Packs

Snap the tear-off lenses in the helmet's green mask first before the outer lens. Each lens has individually pre-folded tabs ensuring that workers tear off only one lens at a time.

Packaging: 50 Pack, Box of 20 Packs

Options: Fine Thread to Contractor Thread , Contractor Thread to Fine Thread

Options:

• Q1 Blast Coupling,  3/4″ Hose ID x 1-1/2″ Hose OD (1-1/4″ Gasket ID)
• Q2 Blast Coupling, 1" Hose ID x 1-7/8" Hose OD (1-1/4" Gasket ID)
• Q3 Blast Coupling,  1-1/4″ Hose ID x 2-5/32″ Hose OD (1-1/4″ Gasket ID)
• Q4 Blast Coupling,  1-1/2″ Hose ID x 2-3/8″ Hose OD (1-1/4″ Gasket ID)

Options:

• MHE1 Nozzle Holder, 3/4″ Hose ID x 1-1/2″ Hose OD (50mm Threads)
• MHE2 Nozzle Holder, 1″ Hose ID x 1-7/8″ Hose OD (50mm Threads)
• MHE3 Nozzle Holder, 1-1/4″ Hose ID x 2-5/32″ Hose OD (50mm Threads)

Options:

• HE1 Nozzle Holder, 3/4″ Hose ID x 1-1/2″ Hose OD (1-1/4″ NPS)
• HE2 Nozzle Holder, 1″ Hose ID x 1-7/8″ Hose OD (1-1/4″ NPS)
• HE3 Nozzle Holder, 1-1/4″ Hose ID x 2-5/32″ Hose OD (1-1/4″ NPS)

Recommended for new construction, light paint and rust removal and special maintenance applications requiring reduced profiles.

Mesh Size: #20/40 - Fine

Surface Profile: 2.0 - 3.5 mils

Packaging: 60 x 50lb Bags, 30 x 100lb Bags, 4,000lb Bulk Bag, Bulk Per Ton 

Sold by the pallet

Abrasive blasting dust can cause serious injury or death. OSHA requires a Type CE NIOSH-certified airline respirator with a positive pressure blasting helmet for protection.

Recommended for general purpose repair and maintenance blasting for the removal of paint and rust, structural steel, mill scale and aggregate exposure.

Mesh Size: #12/40 - Medium

Surface Profile: 3.5 - 4.8 mils

Packaging: 60 x 50lb Bags, 30 x 100lb Bags, 4,000lb Bulk Bag, Bulk Per Ton 

Sold by the pallet

Abrasive blasting dust can cause serious injury or death. OSHA requires a Type CE NIOSH-certified airline respirator with a positive pressure blasting helmet for protection.

Recommended to clean surfaces and create a smooth finish, brush-off blast, or in a high pressure water blast system.

Mesh Size: #30/60 - X-Fine

Surface Profile: 1.0 - 2.6 mils

Packaging: 60 x 50lb Bags, 30 x 100lb Bags, 4,000lb Bulk Bag, Bulk Per Ton 

Sold by the pallet

Abrasive blasting dust can cause serious injury or death. OSHA requires a Type CE NIOSH-certified airline respirator with a positive pressure blasting helmet for protection.

This unit allows for the controlled addition of moisture to bagged material as it passes through the water ring. Pre-dampening eliminates static electricity while greatly reducing dust and rebound, providing greater visibility for the nozzleman.

Features & Benefits:

• Produces proper, in-place shotcrete
• Reduces wear on gun components