Buy Products

Options:

• MHE1 Nozzle Holder, 3/4″ Hose ID x 1-1/2″ Hose OD (50mm Threads)
• MHE2 Nozzle Holder, 1″ Hose ID x 1-7/8″ Hose OD (50mm Threads)
• MHE3 Nozzle Holder, 1-1/4″ Hose ID x 2-5/32″ Hose OD (50mm Threads)

Options:

• HE1 Nozzle Holder, 3/4″ Hose ID x 1-1/2″ Hose OD (1-1/4″ NPS)
• HE2 Nozzle Holder, 1″ Hose ID x 1-7/8″ Hose OD (1-1/4″ NPS)
• HE3 Nozzle Holder, 1-1/4″ Hose ID x 2-5/32″ Hose OD (1-1/4″ NPS)

Recommended for new construction, light paint and rust removal and special maintenance applications requiring reduced profiles.

Mesh Size: #20/40 - Fine

Surface Profile: 2.0 - 3.5 mils

Packaging: 60 x 50lb Bags, 30 x 100lb Bags, 4,000lb Bulk Bag, Bulk Per Ton 

*Sold by the pallet*

Recommended for general purpose repair and maintenance blasting for the removal of paint and rust, structural steel, mill scale and aggregate exposure.

Mesh Size: #12/40 - Medium

Surface Profile: 3.5 - 4.8 mils

Packaging: 60 x 50lb Bags, 30 x 100lb Bags, 4,000lb Bulk Bag, Bulk Per Ton 

*Sold by the pallet*

Blastox® is combined with Black Beauty® Coal to stabilize lead paint during abrasive blasting projects, ensuring that the spent abrasive waste passes the TCLP test for lead. This process reclassifies the waste as non-hazardous, helping to significantly reduce the costs associated with hazardous waste management, including generation, transportation, and disposal.

Coal Mesh Size: X-Fine, Fine, Medium

Blastox® Blend: 15%, 20%

Packaging: 60 x 50lb Bags, 30 x 100lb Bags, 4,000lb Bulk Bag, Bulk Per Ton 

*Sold by the pallet*

Recommended to clean surfaces and create a smooth finish, brush-off blast, or in a high pressure water blast system.

Mesh Size: #30/60 - X-Fine

Surface Profile: 1.0 - 2.6 mils

Packaging: 60 x 50lb Bags, 30 x 100lb Bags, 4,000lb Bulk Bag, Bulk Per Ton 

*Sold by the pallet*

This unit allows for the controlled addition of moisture to bagged material as it passes through the water ring. Pre-dampening eliminates static electricity while greatly reducing dust and rebound, providing greater visibility for the nozzleman.

Features & Benefits:

• Produces proper, in-place shotcrete
• Reduces wear on gun components

With various power levels and equipment options, it is suitable for large and small jobs and ideal for the corners and edges of shaped components. The new WIWA Phoenix GX series provides a versatile and high-quality pump range for almost all applications.

*Ready to Spray Upon Request*

The Putzmeister Piccola is built to the Swiss design with a vane air motor (250–600 cfm), flat hopper with bag breaker and screen, and 11/2" (38mm) outlet diameter as standard. It is a recommended machine for dry-process shotcrete in Refractory and Civil applications. Versatile and robust, this machine requires little maintenance and is easy to operate.

Features & Benefits:

• Variable speed electric motor, diesel engine, or no power (rig mounted)
• Rotor options including 12 round-half, 12 round-full, 9 round-full, pie-half and pie-full
• Slanted hopper with screen
• Forklift skid or foam-filled rubber tire mounting
• Dust suppression system
• Built to the Swiss design with a vane air motor (250-600 cfm)

Air-Cooled Aftercoolers use ambient air to lower the temperature of compressed air. These tools pass air over a set of warmed coils to condense any existing water vapor into liquid. This liquid is then removed through a drain within the unit's housing to prevent buildup within a larger compressed air system.

Options: 250 CFM, 375 CFM

Experience noticeable quality, best engineering skills and longevity under the toughest operating conditions. The GX generation of motors captivates with a full metal housing, optimized air distribution to minimize freezing during permanent operation and reduced noise emission. Low-maintenance, durable material pumps lower operating costs and made for uncompromised material handling.

*Ready to Spray Upon Request*

Specially designed for the application of high solids, high viscosity, low solvent and solvent free materials. The high pressure pumps of the Professional series are also suitable for use in paint circulation systems. The high dispensing volume ensures a slow piston speed even with large nozzle holes, and therefore wear time is very low.

*Spray Hose, Guns, and Tips Sold Separate*

GMA's PyroBlast™, also known as Pyroxene, is an ideal choice for medium to light abrasive blasting, perfect for precast concrete, brick, stone, automotive bodies, and wood. It efficiently removes light paints, varnish, and grime, providing excellent sanding quality for fast, cost-effective results.

Mesh Size: #22/55

Packaging: 40 x 55lb Bags, 2,200lb Bulk Bag, 4,400lb Bulk Bag

*Sold by the pallet*

This unit is perfect for construction sites, industrial applications, events, and more. Its fuel-efficient engine ensures extended runtimes, while the compact and sound-attenuated design keeps noise levels low. The QAS 125 is built for tough environments, providing dependable performance and easy operation. 

Performance: 125 kVA, 100 kW

The Atlas Copco QAS 125 generators are prime power, multi-voltage, sound attenuated, mobile generators. They are powered by a John Deere T4 Final liquid-cooled, six-cylinder diesel engine.

All QAS generators include the latest Tier 4 Final engine and have a footprint that is up to 20 percent smaller than the previous generation. The starting mechanism ensures that stable power is achieved in less than six seconds.

Performance: 125 kVA, 100 kW

All QAS generators include the latest Tier 4 Final engine and have a footprint that is up to 20 percent smaller than the previous generation. The starting mechanism ensures that stable power is achieved in less than six seconds. See download for technical data.

John Deere T4 Final: 150 kVA, 200 kVA, 250 kVA, 330 kVA

Scania T4 Final: 410 kVA

Volvo T4 Final: 700 kVA