CIM ECO Epoxy Primer is a two-component solvent free epoxy coating formulated for porous and non-porous surfaces such as concrete, wood, steel, aluminum, and other metals.

*Kit Includes Resin and Hardener*

Advantages:

• Solvent-free formula
• Forms a protective film on porous surfaces to reduce outgassing in waterproof coatings
• Prevents the formation of flash rust on freshly blasted metals
• CIM liquid applied waterproofing membranes can be applied in as few as 4 hours after primer application

CIM EMT primer is a two-component solvent-free epoxy primer designed for green and damp porous surfaces such as concrete.

*Kit Includes Resin and Hardener*

Features & Benefits:

CIM VOC Compliant Bonding Agent is an organo-silane compound dispersed in acetone. It improves the adhesion of CIM high-performance coatings and linings to a variety of non-porous surfaces such as metal, glass, CIM coatings past allowable recoat window.

Features & Benefits: 

• High Solids/low VOC
• Compliant to toughest VOC regulations
• It improves the adhesion of CIM coatings to non-porous substrates
• Improves metal, glass, plastic, tile, etc.

GMA ClassicCut™ 80 is a versatile, all-purpose abrasive ideal for general waterjet cutting and is recognized as the industry standard waterjet cutting abrasive among waterjet manufacturers globally. 

Mesh Size: #80

Surface Profile: 2.0 - 3.0 mils

Packaging: 40 x 55lb Bags, 2,200lb Bulk Bag, 4,400lb Bulk Bag

Sold by the pallet

Abrasive blasting dust can cause serious injury or death. OSHA requires a Type CE NIOSH-certified airline respirator with a positive pressure blasting helmet for protection.

Second Stage: Removes extremely fine oil mists down to .01 microns. The maximum remaining filter efficiency is 99.9998%.

The RPB® Cold Air Tube Assembly cools compressed breathing air coming into respirators by as much as 32 °F(18 °C). The 4000-01 Cold Air Tube helps maximize worker comfort and increase productivity in hot climates.

The original ComboValve® control valve combines the functions of the air inlet valve and blowdown valve, eliminating premature failure of the blowdown system. Only a genuine Schmidt brand ComboValve offers superior performance, durability and reliability. ComboValve® is used for pressure release blast pots. 

Blowdown Hose Specs: 3/4" 4-Ply Blast Hose w/ ALHE1 fitting

*Replacement Parts and Repair Kits Available*

Flextral MH20-20 Flex-Chord Fabric Concrete Placement Hose

I.D. Options: 1-1/2", 2"

Standard Length: 50' Section

*If hose is damaged, additional charges will apply*

Bullard Cool Tubes cool incoming air from breathing air sources by as much as 20-30° F (11-17° C). These cool tubes feature adjustable airflow control valves that allow the user to adjust the incoming air temperature to a level best suited to individual comfort.

Van Air Systems' Dry-O-Lite is a low-cost absorbent deliquescent desiccant formulated for single and sequential tower dehydration systems. When used in a properly sized single or sequential tower desiccant air dryer, Dry-O-Lite will remove sufficient moisture vapor to establish a 55% RH in the air line.

Packaging: 50lb bag, 40 x 50lb bag

Plural component spray units are custom spray systems typically used on large commercial painting jobs. These units use two or more coatings, like epoxy or polyurethanes, which are then combined and sprayed simultaneously on a surface.

Accessories Package: (2) Spray Guns, (2) Spray Tips, (2) Guards, (2) 15' Whips, 100' Hose Bundle

*Trained Operator Required*

Plural component spray units are custom spray systems typically used on large commercial painting jobs. These units use two or more coatings, like epoxy or polyurethanes, which are then combined and sprayed simultaneously on a surface.

*Ready To Spray Upon Request*

Plural component spray units are custom spray systems typically used on large commercial painting jobs. These units use two or more coatings, like epoxy or polyurethanes, which are then combined and sprayed simultaneously on a surface.

Accessories Package: (2) Spray Guns, (2) Spray Tips, (2) Guards, (2) 15' Whips, 100' Hose Bundle

*Trained Operator Required*

Plural component spray units are custom spray systems typically used on large commercial painting jobs. These units use two or more coatings, like epoxy or polyurethanes, which are then combined and sprayed simultaneously on a surface.

*Ready To Spray Upon Request*

Plural component spray units are custom spray systems typically used on large commercial painting jobs. These units use two or more coatings, like epoxy or polyurethanes, which are then combined and sprayed simultaneously on a surface.

Accessories Package: (2) Spray Guns, (2) Spray Tips, (2) Guards, (2) 15' Whips, 100' Hose Bundle

*Trained Operator Required*