3 Stage Filtration
First Stage: Removes solid contaminants and bulk liquids from the breathing air, down to five microns, prolonging the life of the second and third stage elements.
3 Stage Filtration
First Stage: Removes solid contaminants and bulk liquids from the breathing air, down to five microns, prolonging the life of the second and third stage elements.
Second Stage: Removes extremely fine oil mists down to .01 microns. The maximum remaining filter efficiency is 99.9998%.
Third Stage: Removes unpleasant oil and hydrocarbon vapors and odors from the air. The maximum remaining oil content is .003 ppm by weight. Filter efficiency is 99.9998%.
Features & Benefits:
CleanWirx 207 provides the only health, safety, and environmentally conscious metal surface preparation solution to exceed the highest standards for corrosion elimination, even in the most challenging heavy-industrial environments.
The CleanWirx 207 one step application process decontaminates surfaces at the molecular level, eliminating visually undetectable levels of highly corrosive substances, providing a uniform receptive surface prior to coatings application, and greatly increasing coating adhesion with NO film formers.
Options: 1 Gallon, 5 Gallon, 42 Gallon, 275 Gallon
The Bullard Carbon Monoxide (CO) Monitor sounds an alarm when CO levels exceed either OSHA or CSA maximum thresholds. CO Monitors can duplicate local alarms found on the Clean Air Box and signal isolated workers of respiratory threats. Ideal for use with the Air Gladiator Airline Filter.
Features & Benefits:
The RPB® Cold Air Tube Assembly cools compressed breathing air coming into respirators by as much as 32 °F(18 °C). The 4000-01 Cold Air Tube helps maximize worker comfort and increase productivity in hot climates.
The original ComboValve® control valve combines the functions of the air inlet valve and blowdown valve, eliminating premature failure of the blowdown system. Only a genuine Schmidt brand ComboValve offers superior performance, durability and reliability. ComboValve® is used for pressure release blast pots.
Blowdown Hose Specs: 3/4" 4-Ply Blast Hose w/ ALHE1 fitting
*Replacement Parts and Repair Kits Available*
Flextral MH20-20 Flex-Chord Fabric Concrete Placement Hose
I.D. Options: 1-1/2", 2"
Standard Length: 50' Section
*If hose is damaged, additional charges will apply*
Bullard Cool Tubes cool incoming air from breathing air sources by as much as 20-30° F (11-17° C). These cool tubes feature adjustable airflow control valves that allow the user to adjust the incoming air temperature to a level best suited to individual comfort.
Van Air Systems' Dry-O-Lite is a low-cost absorbent deliquescent desiccant formulated for single and sequential tower dehydration systems. When used in a properly sized single or sequential tower desiccant air dryer, Dry-O-Lite will remove sufficient moisture vapor to establish a 55% RH in the air line.
Packaging: 50lb bag, 40 x 50lb bag
Plural component spray units are custom spray systems typically used on large commercial painting jobs. These units use two or more coatings, like epoxy or polyurethanes, which are then combined and sprayed simultaneously on a surface.
Accessories Package: (2) Spray Guns, (2) Spray Tips, (2) Guards, (2) 15' Whips, 100'-200' Hose Bundle
*Trained Operator Required*
Plural component spray units are custom spray systems typically used on large commercial painting jobs. These units use two or more coatings, like epoxy or polyurethanes, which are then combined and sprayed simultaneously on a surface.
*Ready To Spray Upon Request*
Plural component spray units are custom spray systems typically used on large commercial painting jobs. These units use two or more coatings, like epoxy or polyurethanes, which are then combined and sprayed simultaneously on a surface.
Accessories Package: (2) Spray Guns, (2) Spray Tips, (2) Guards, (2) 15' Whips, 100'-200' Hose Bundle
*Trained Operator Required*
Plural component spray units are custom spray systems typically used on large commercial painting jobs. These units use two or more coatings, like epoxy or polyurethanes, which are then combined and sprayed simultaneously on a surface.
*Ready To Spray Upon Request*
Plural component spray units are custom spray systems typically used on large commercial painting jobs. These units use two or more coatings, like epoxy or polyurethanes, which are then combined and sprayed simultaneously on a surface.
Accessories Package: (2) Spray Guns, (2) Spray Tips, (2) Guards, (2) 15' Whips, 100'-200' Hose Bundle
*Trained Operator Required*
FSP Bridge Dust Collector Hose
Double-ply black PVC vinyl coated polyester fabric hose reinforced with a spring steel wire helix & gray external PVC wearstrip.
I.D. Options: 16", 20"
Standard Length: 25' Section
FSP Bridge Dust Collector Hose
Double-ply black PVC vinyl coated polyester fabric hose reinforced with a spring steel wire helix & gray external PVC wearstrip
I.D. Options: 12", 16", 18", 20", 24"
Standard Length: 25' Section
FSP Bridge Dust Collector Hose
Double-ply black PVC vinyl coated polyester fabric hose reinforced with a spring steel wire helix & gray external PVC wearstrip
I.D. Options: 12", 16", 20", 24"
Standard Length: 25' Section